Richmond Weather: Clear 71° Connect With Us:
Schedule a Service Call

Energy Savings Agreement

Schedule a Service Call


Attention valued customer: We respond to website requests during our normal business hours of Monday - Friday from 7:30 a.m. to 4:30 p.m. If this is an emergency, please call our 24/7 hotline at (804) 748-6728 and we will respond immediately. Thank you for contacting Bradley Mechanical.

Morning: 8:00 a.m. - 12:00 p.m.
Afternoon: 12:00 p.m. - 4:30 p.m.

Schedule an ESA Tune-up


Attention valued customer: We respond to website requests during our normal business hours of Monday - Friday from 7:30 a.m. to 4:30 p.m. If this is an emergency, please call our 24/7 hotline at (804) 748-6728 and we will respond immediately. Thank you for contacting Bradley Mechanical.

Morning: 8:00 a.m. - 12:00 p.m.
Afternoon: 12:00 p.m. - 4:30 p.m.

Get a Quote


Attention valued customer: We respond to website requests during our normal business hours of Monday - Friday from 7:30 a.m. to 4:30 p.m. If this is an emergency, please call our 24/7 hotline at (804) 748-6728 and we will respond immediately. Thank you for contacting Bradley Mechanical.

Morning: 8:00 a.m. - 12:00 p.m.
Afternoon: 12:00 p.m. - 4:30 p.m.
Weekend (Must Be Scheduled)

Ask a Technician


Attention valued customer: We respond to website requests during our normal business hours of Monday - Friday from 7:30 a.m. to 4:30 p.m. If this is an emergency, please call our 24/7 hotline at (804) 748-6728 and we will respond immediately. Thank you for contacting Bradley Mechanical.

ESA (Energy Saving Agreement)

Residential Energy Savings Agreement

Maintaining Your HVAC System Is Important

Bradley Mechanical ESA Member

Preventive maintenance is one of the most important factors to keeping your HVAC system operating at optimal efficiency. Now that you have done the maintenance tune-up, everything should be clean and back to ideal condition, right? This is where you could be wrong, many companies offer a tune-up, but only a few actually clean the equipment.

Bradley Mechanical has the most comprehensive and detailed tune-up in the industry today. We not only inspect the entire system for potential failures, we clean the indoor/outdoor coils, blower wheel, drain lines, and even apply a UV resistant coating to the outdoor unit to protect from day to day UV exposure. A proper maintenance tune-up should take about one hour to one and a half hours per system to clean and check for proper operation. Companies near and far offer $67, $57, $47 tune-ups and that sounds like a great deal until the extra charges are presented to clean the coils, blower wheel, etc. What your money has bought you is the standard flashlight checkup.

Bradley Mechanical offers a maintenance program called the Energy Savings Agreement (ESA). With an ESA, customers get a detailed system cleaning and inspection with a few perks. We come out twice a year to prepare your system for the major season changes. ESA customers also have priority service over non-ESA customers, 24-hour service with no overtime charges, and 15% off parts and repairs. After having an ESA tune-up performed, customers will see a 15-30% increase in system efficiency – guaranteed! Customer satisfaction is our top priority, so give us a call to experience the proper total system maintenance and start saving money today!

ESA Benefits

  • Lower utility bills
  • Extended equipment Life
  • Fewer repairs
  • Improved capacity
  • 15% discount on repairs
  • Priority customer
  • Inflation protection
  • Agreement is transferable
  • 24-Hr. emergency service
  • Never an overtime charge
  • We call you to schedule

Precision Tune-up Procedures

  • Clean and adjust burner assembly
  • Clean ignition assembly
  • Clean heat exchanger or elements
  • Monitor flue draft
  • Monitor refrigerant pressure
  • Test starting capabilities
  • Test safety controls
  • Clean or replace customer owned air filters
  • Clean and adjust blower components
  • Measure for correct air flow
  • Tighten electrical connections
  • Measure volts / amps
  • Lubricate all moving parts
  • Adjust thermostat calibration
  • Clean evaporator coil if accessible
  • Clean condenser coil
  • Clean condensate drains
  • Measure temperature difference
  • Apply protective coating to outside unit

Commercial Energy Savings Agreement

Commercial businesses and building are not the same, so why would you get the same maintenance? Here at Bradley, we will send out a technician to inspect the building’s equipment and they will put together a custom maintenance plan for your business.

Commercial ESA Procedures

  • All the standard maintenance procedures will apply to commercial maintenance
  • We will supply all belts and filters for each unit
  • All filters will also be changed on each scheduled maintenance
  • Monthly filter changes can be scheduled depending on business type and filtration requirements
  • Business will also receive a 15% discount on parts

Weather Releated Topics

How Generators Can Actually Save Money

Standby generators offer cost savings for homeowners and business owners alike...

Continue Reading
Why You Should Get Your Water Tested

While we may take clean drinking water for granted, there are possible hazards and contaminants that could be...

Continue Reading
Extend the Life of Your AC Unit

It’s important for homeowners to understand the life-cycle of an AC unit from installation to long-term maintenance...

Continue Reading
Is Your Home Making You Sick?

Mold, mildew, rotting wood, critters, and insects are all things that you never want to see in a home, let alone breathe...

Continue Reading